The Module System of GF Aarne Ranta 8/4/2005 - 5/7/2007 %!postproc(html): #SUB1 1 %!postproc(html): #SUBk k %!postproc(html): #SUBi i %!postproc(html): #SUBm m %!postproc(html): #SUBn n %!postproc(html): #SUBp p %!postproc(html): #SUBq q % to compile: txt2tags --toc -thtml modulesystem.txt A GF grammar consists of a set of **modules**, which can be combined in different ways to build different grammars. There are several different **types of modules**: - ``abstract`` - ``concrete`` - ``resource`` - ``interface`` - ``instance`` - ``incomplete concrete`` We will go through the module types in this order, which is also their order of "importance" from the most basic to the more advanced ones. This document presupposes knowledge of GF judgements and expressions, which can be gained from the [GF tutorial tutorial/gf-tutorial2.html]. It aims to give a systamatic description of the module system; some tutorial information is repeated to make the document self-contained. =The principal module types= ==Abstract syntax== Any GF grammar that is used in an application will probably contain at least one module of the ``abstract`` module type. Here is an example of such a module, defining a fragment of propositional logic. ``` abstract Logic = { cat Prop ; fun Conj : Prop -> Prop -> Prop ; fun Disj : Prop -> Prop -> Prop ; fun Impl : Prop -> Prop -> Prop ; fun Falsum : Prop ; } ``` The **name** of this module is ``Logic``. An ``abstract`` module defines an **abstract syntax**, which is a language-independent representation of a fragment of language. It consists of two kinds of **judgements**: - ``cat`` judgements telling what **categories** there are (types of abstract syntax trees) - ``fun`` judgements telling what **functions** there are (to build abstract syntax trees) There can also be ``def`` and ``data`` judgements in an abstract syntax. ===Compilation of abstract syntax=== The GF grammar compiler expects to find the module ``Logic`` in a file named ``Logic.gf``. When the compiler is run, it produces another file, named ``Logic.gfc``. This file is in the format called **canonical GF**, which is the "machine language" of GF. Next time that the module ``Logic`` is needed in compiling a grammar, it can be read from the compiled (``gfc``) file instead of the source (``gf``) file, unless the source has been changed after the compilation. ==Concrete syntax== In order for a GF grammar to describe a concrete language, the abstract syntax must be completed with a **concrete syntax** of it. For this purpose, we use modules of type ``concrete``: for instance, ``` concrete LogicEng of Logic = { lincat Prop = {s : Str} ; lin Conj a b = {s = a.s ++ "and" ++ b.s} ; lin Disj a b = {s = a.s ++ "or" ++ b.s} ; lin Impl a b = {s = "if" ++ a.s ++ "then" ++ b.s} ; lin Falsum = {s = ["we have a contradiction"]} ; } ``` The module ``LogicEng`` is a concrete syntax ``of`` the abstract syntax ``Logic``. The GF grammar compiler checks that the concrete is valid with respect to the abstract syntax ``of`` which it is claimed to be. The validity requires that there has to be - a ``lincat`` judgement for each ``cat`` judgement, telling what the **linearization types** of categories are - a ``lin`` judgement for each ``fun`` judgement, telling what the **linearization functions** corresponding to functions are Validity also requires that the linearization functions defined by ``lin`` judgements are type-correct with respect to the linearization types of the arguments and value of the function. There can also be ``lindef`` and ``printname`` judgements in a concrete syntax. ==Top-level grammar== When a ``concrete`` module is successfully compiled, a ``gfc`` file is produced in the same way as for ``abstract`` modules. The pair of an ``abstract`` and a corresponding ``concrete`` module is a **top-level grammar**, which can be used in the GF system to perform various tasks. The most fundamental tasks are - **linearization**: take an abstract syntax tree and find the corresponding string - **parsing**: take a string and find the corresponding abstract syntax trees (which can be zero, one, or many) In the current grammar, infinitely many trees and strings are recognized, although no very interesting ones. For example, the tree ``` Impl (Disj Falsum Falsum) Falsum ``` has the linearization ``` if we have a contradiction or we have a contradiction then we have a contradiction ``` which in turn can be parsed uniquely as that tree. ===Compiling top-level grammars=== When GF compiles the module ``LogicEng`` it also has to compile all modules that it **depends** on (in this case, just ``Logic``). The compilation process starts with dependency analysis to find all these modules, recursively, starting from the explicitly imported one. The compiler then reads either ``gf`` or ``gfc`` files, in a dependency order. The decision on which files to read depends on time stamps and dependencies in a natural way, so that all and only those modules that have to be compiled are compiled. (This behaviour can be changed with flags, see below.) ===Using top-level grammars=== To use a top-level grammar in the GF system, one uses the ``import`` command (short name ``i``). For instance, ``` i LogicEng.gf ``` It is also possible to specify the imported grammar(s) on the command line when invoking GF: ``` gf LogicEng.gf ``` Various **compilation flags** can be added to both ways of compiling a module: - ``-src`` forces compilation form source files - ``-v`` gives more verbose information on compilation - ``-s`` makes compilation silent (except if it fails with an error message) A complete list of flags can be obtained in GF by ``help i``. Importing a grammar makes it visible in GF's **internal state**. To see what modules are available, use the command ``print_options`` (``po``). You can empty the state with the command ``empty`` (``e``); this is needed if you want to read in grammars with a different abstract syntax than the current one without exiting GF. Grammar modules can reside in different directories. They can then be found by means of a **search path**, which is a flag such as ``` -path=.:api/toplevel:prelude ``` given to the ``import`` command or the shell command invoking GF. (It can also be defined in the grammar file; see below.) The compiler writes every ``gfc`` file in the same directory as the corresponding ``gf`` file. The ``path`` is relative to the working directory ``pwd``, so that all directories listed are primarily interpreted as subdirectories of ``pwd``. Secondarily, they are searched relative to the value of the environment variable ``GF_LIB_PATH``, which is by default set to ``/usr/local/share/GF``. Parsing and linearization can be performed with the ``parse`` (``p``) and ``linearize`` (``l``) commands, respectively. For instance, ``` > l Impl (Disj Falsum Falsum) Falsum if we have a contradiction or we have a contradiction then we have a contradiction > p -cat=Prop "we have a contradiction" Falsum ``` Notice that the ``parse`` command needs the parsing category as a flag. This necessary since a grammar can have several possible parsing categories ("entry points"). ==Multilingual grammar== One ``abstract`` syntax can have several ``concrete`` syntaxes. Here are two new ones for ``Logic``: ``` concrete LogicFre of Logic = { lincat Prop = {s : Str} ; lin Conj a b = {s = a.s ++ "et" ++ b.s} ; lin Disj a b = {s = a.s ++ "ou" ++ b.s} ; lin Impl a b = {s = "si" ++ a.s ++ "alors" ++ b.s} ; lin Falsum = {s = ["nous avons une contradiction"]} ; } concrete LogicSymb of Logic = { lincat Prop = {s : Str} ; lin Conj a b = {s = "(" ++ a.s ++ "&" ++ b.s ++ ")"} ; lin Disj a b = {s = "(" ++ a.s ++ "v" ++ b.s ++ ")"} ; lin Impl a b = {s = "(" ++ a.s ++ "->" ++ b.s ++ ")"} ; lin Falsum = {s = "_|_"} ; } ``` The four modules ``Logic``, ``LogicEng``, ``LogicFre``, and ``LogicSymb`` together form a **multilingual grammar**, in which it is possible to perform parsing and linearization with respect to any of the concrete syntaxes. As a combination of parsing and linearization, one can also perform **translation** from one language to another. (By **language** we mean the set of expressions generated by one concrete syntax.) ===Using multilingual grammars=== Any combination of abstract syntax and corresponding concrete syntaxes is thus a multilingual grammar. With many languages and other enrichments (as described below), a multilingual grammar easily grows to the size of tens of modules. The grammar developer, having finished her job, can package the result in a **multilingual canonical grammar**, a file with the suffix ``.gfcm``. For instance, to compile the set of grammars described by now, the following sequence of GF commands can be used: ``` i LogicEng.gf i LogicFre.gf i LogicSymb.gf pm | wf logic.gfcm ``` The "end user" of the grammar only needs the file ``logic.gfcm`` to access all the functionality of the multilingual grammar. It can be imported in the GF system in the same way as ``.gf`` files. But it can also be used in the [Embedded Java Interpreter for GF http://www.cs.chalmers.se/~bringert/gf/gf-java.html] to build Java programs of which the multilingual grammar functionalities (linearization, parsing, translation) form a part. In a multilingual grammar, the concrete syntax module names work as names of languages that can be selected for linearization and parsing: ``` > l -lang=LogicFre Impl Falsum Falsum si nous avons une contradiction alors nous avons une contradiction > l -lang=LogicSymb Impl Falsum Falsum ( _|_ -> _|_ ) > p -cat=Prop -lang=LogicSymb "( _|_ & _|_ )" Conj Falsum Falsum ``` The option ``-multi`` gives linearization to all languages: ``` > l -multi Impl Falsum Falsum if we have a contradiction then we have a contradiction si nous avons une contradiction alors nous avons une contradiction ( _|_ -> _|_ ) ``` Translation can be obtained by using a **pipe** from a parser to a linearizer: ``` > p -cat=Prop -lang=LogicSymb "( _|_ & _|_ )" | l -lang=LogicEng if we have a contradiction then we have a contradiction ``` ==Resource modules== The ``concrete`` modules shown above would look much nicer if we used the main idea of functional programming: avoid repetitive code by using **functions** that capture repeated patterns of expressions. A collection of such functions can be a valuable **resource** for a programmer, reusable in many different top-level grammars. Thus we introduce the ``resource`` module type, with the first example ``` resource Util = { oper SS : Type = {s : Str} ; oper ss : Str -> SS = \s -> {s = s} ; oper paren : Str -> Str = \s -> "(" ++ s ++ ")" ; oper infix : Str -> SS -> SS -> SS = \h,x,y -> ss (x.s ++ h ++ y.s) ; oper infixp : Str -> SS -> SS -> SS = \h,x,y -> ss (paren (infix h x y)) ; } ``` Modules of ``resource`` type have two forms of judgement: - ``oper`` defining auxiliary operations - ``param`` defining parameter types A ``resource`` can be used in a ``concrete`` (or another ``resource``) by ``open``ing it. This means that all operations (and parameter types) defined in the resource module become usable in module that opens it. For instance, we can rewrite the module ``LogicSymb`` much more concisely: ``` concrete LogicSymb of Logic = open Util in { lincat Prop = SS ; lin Conj = infixp "&" ; lin Disj = infixp "v" ; lin Impl = infixp "->" ; lin Falsum = ss "_|_" ; } ``` What happens when this variant of ``LogicSymb`` is compiled is that the ``oper``-defined constants of ``Util`` are **inlined** in the right-hand-sides of the judgements of ``LogicSymb``, and these expressions are **partially evaluated**, i.e. computed as far as possible. The generated ``gfc`` file will look just like the file generated for the first version of ``LogicSymb`` - at least, it will do the same job. Several ``resource`` modules can be ``open``ed at the same time. If the modules contain same names, the conflict can be resolved by **qualified** opening and reference. For instance, ``` concrete LogicSymb of Logic = open Util, Prelude in { ... } ; ``` (where ``Prelude`` is a standard library of GF) brings into scope two definitions of the constant ``SS``. To specify which one is used, you can write ``Util.SS`` or ``Prelude.SS`` instead of just ``SS``. You can also introduce abbreviations to avoid long qualifiers, e.g. ``` concrete LogicSymb of Logic = open (U=Util), (P=Prelude) in { ... } ; ``` which means that you can write ``U.SS`` and ``P.SS``. Judgements of ``param`` and ``oper`` forms may also be used in ``concrete`` modules, and they are then considered local to those modules, i.e. they are not exported. ===Compiling resource modules=== The compilation of a ``resource`` module differs from the compilation of ``abstract`` and ``concrete`` modules because ``oper`` operations do not in general have values in ``gfc``. A ``gfc`` file //is// generated, but it contains only ``param`` judgements (also recall that ``oper``s are inlined in their top-level use sites, so it is not necessary to save them in the compiled grammar). However, since computing the operations over and over again can be time comsuming, and since type checking ``resource`` modules also takes time, a third kind of file is generated for resource modules: a ``.gfr`` file. This file is written in the GF source code notation, but it is type checked and type annotated, and ``oper``s are computed as far as possible. If you look at any ``gfc`` or ``gfr`` file generated by the GF compiler, you see that all names have been replaced by their qualified variants. This is an important first step (after parsing) the compiler does. As for the commands in the GF shell, some output qualified names and some not. The difference does not always result from firm principles. ===Using resource modules=== The typical use is through ``open`` in a ``concrete`` module, which means that ``resource`` modules are not imported on their own. However, in the developing and testing phase of grammars, it can be useful to evaluate ``oper``s with different arguments. To prevent them from being thrown away after inlining, the ``-retain`` option can be used: ``` > i -retain Util.gf ``` The command ``compute_concrete`` (``cc``) can now be used for evaluating expressions that may contain operations defined in ``Util``: ``` > cc ss (paren "foo") {s = "(" ++ "foo" ++ ")"} ``` To find out what ``oper``s are available for a given type, the command ``show_operations`` (``so``) can be used: ``` > so SS Util.ss : Str -> SS ; Util.infix : Str -> SS -> SS -> SS ; Util.infixp : Str -> SS -> SS -> SS ; ``` ==Inheritance== The most characteristic modularity of GF lies in the division of grammars into ``abstract``, ``concrete``, and ``resource`` modules. This permits writing multilingual grammar and sharing the maximum of code between different languages. In addition to this special kind of modularity, GF provides **inheritance**, which is familiar from other programming languages (in particular, object-oriented ones). Inheritance means that a module inherits all judgements from another module; we also say that it **extends** the other module. Inheritance is useful to divide big grammars into smaller units, and also to reuse the same units in different bigger grammars. The first example of inheritance is for abstract syntax. Let us extend the module ``Logic`` to ``Arithmetic``: ``` abstract Arithmetic = Logic ** { cat Nat ; fun Even : Nat -> Prop ; fun Odd : Nat -> Prop ; fun Zero : Nat ; fun Succ : Nat -> Nat ; } ``` In parallel with the extension of the abstract syntax ``Logic`` to ``Arithmetic``, we can extend the concrete syntax ``LogicEng`` to ``ArithmeticEng``: ``` concrete ArithmeticEng of Arithmetic = LogicEng ** open Util in { lincat Nat = SS ; lin Even x = ss (x.s ++ "is" ++ "even") ; lin Odd x = ss (x.s ++ "is" ++ "odd") ; lin Zero = ss "zero" ; lin Succ x = ss ("the" ++ "successor" ++ "of" ++ x.s) ; } ``` Another extension of ``Logic`` is ``Geometry``, ``` abstract Geometry = Logic ** { cat Point ; cat Line ; fun Incident : Point -> Line -> Prop ; } ``` The corresponding concrete syntax is left as exercise. ===Multiple inheritance=== Inheritance can be **multiple**, which means that a module may extend many modules at the same time. Suppose, for instance, that we want to build a module for mathematics covering both arithmetic and geometry, and the underlying logic. We then write ``` abstract Mathematics = Arithmetic, Geometry ** { } ; ``` We could of course add some new judgements in this module, but it is not necessary to do so. If no new judgements are added, the module body can be omitted: ``` abstract Mathematics = Arithmetic, Geometry ; ``` The module ``Mathematics`` shows that it is possibe to extend a module already built by extension. The correctness criterion for extensions is that the same name (``cat``, ``fun``, ``oper``, or ``param``) may not be defined twice in the resulting union of names. That the names defined in ``Logic`` are "inherited twice" by ``Mathematics`` (via both ``Arithmetic`` and ``Geometry``) is no violation of this rule; the usual problems of multiple inheritance do not arise, since the definitions of inherited constants cannot be changed. ===Restricted inheritance=== Inheritance can be **restricted**, which means that only some of the constants are inherited. There are two dual notations for this: ``` A [f,g] ``` meaning that //only// ``f`` and ``g`` are inherited from ``A``, and ``` A-[f,g] ``` meaning that //everything except// ``f`` is ``g`` are inherited from ``A``. Constants that are not inherited may be redefined in the inheriting module. ===Compiling inheritance=== Inherited judgements are not copied into the inheriting modules. Instead, an **indirection** is created for each inherited name, as can be seen by looking into the generated ``gfc`` (and ``gfr``) files. Thus for instance the names ``` Mathematics.Prop Arithmetic.Prop Geometry.Prop Logic.Prop ``` all refer to the same category, declared in the module ``Logic``. ===Inspecting grammar hierarchies=== The command ``visualize_graph`` (``vg``) shows the dependency graph in the current GF shell state. The graph can also be saved in a file and used e.g. in documentation, by the command ``print_multi -graph`` (``pm -graph``). The ``vg`` command uses the free software packages Graphviz (commad ``dot``) and Ghostscript (command ``gv``). ==Reuse of top-level grammars as resources== Top-level grammars have a straightforward translation to ``resource`` modules. The translation concerns pairs of abstract-concrete judgements: ``` cat C ; ===> oper C : Type = T ; lincat C = T ; fun f : A ; ===> oper f : A = t ; lin f = t ; ``` Due to this translation, a ``concrete`` module can be ``open``ed in the same way as a ``resource`` module; the translation is done on the fly (it is computationally very cheap). Modular grammar engineering often means that some grammarians focus on the semantics of the domain whereas others take care of linguistic details. Thus a typical reuse opens a linguistically oriented **resource grammar**, ``` abstract Resource = { cat S ; NP ; A ; fun PredA : NP -> A -> S ; } concrete ResourceEng of Resource = { lincat S = ... ; lin PredA = ... ; } ``` The **application grammar**, instead of giving linearizations explicitly, just reduces them to categories and functions in the resource grammar: ``` concrete ArithmeticEng of Arithmetic = LogicEng ** open ResourceEng in { lincat Nat = NP ; lin Even x = PredA x (regA "even") ; } ``` If the resource grammar is only capable of generating grammatically correct expressions, then the grammaticality of the application grammar is also guaranteed: the type checker of GF is used as grammar checker. To guarantee distinctions between categories that have the same linearization type, the actual translation used in GF adds to every linearization type and linearization a **lock field**, ``` cat C ; ===> oper C : Type = T ** {lock_C : {}} ; lincat C = T ; fun f : C_1 ... C_n -> C ; ===> oper f : C_1 ... C_n -> C = \x_1,...,x_n -> lin f = t ; t x_1 ... x_n ** {lock_C = <>}; ``` (Notice that the latter translation is type-correct because of record subtyping, which means that ``t`` can ignore the lock fields of its arguments.) An application grammarian who only uses resource grammar categories and functions never needs to write these lock fields herself. Having to do so serves as a warning that the grammaticality guarantee given by the resource grammar no longer holds. **Note**. The lock field mechanism is experimental, and may be changed to a stronger abstraction mechnism in the future. This may result in hand-written lock fields ceasing to work. =Additional module types= ==Interfaces, instances, and incomplete grammars== One difference between top-level grammars and ``resource`` modules is that the former systematically separete the declarations of categories and functions from their definitions. In the reuse translation creating and ``oper`` judgement, the declaration coming from the ``abstract`` module is put together with the definition coming from the ``concrete`` module. However, the separation of declarations and definitions is so useful a notion that GF also has specific modules types that ``resource`` modules into two parts. In this splitting, an ``interface`` module corresponds to an abstract syntax, in giving the declarations of operations (and parameter types). For instance, a generic markup interface would look as follows: ``` interface Markup = open Util in { oper Boldface : Str -> Str ; oper Heading : Str -> Str ; oper markupSS : (Str -> Str) -> SS -> SS = \f,r -> ss (f r.s) ; } ``` The definitions of the constants declared in an ``interface`` are given in an ``instance`` module (which is always ``of`` an interface, in the same way as a ``concrete`` is always ``of`` an abstract). The following ``instance``s define markup in HTML and latex. ``` instance MarkupHTML of Markup = open Util in { oper Boldface s = "<b>" ++ s ++ "</b>" ; oper Heading s = "<h2>" ++ s ++ "</h2>" ; } instance MarkupLatex of Markup = open Util in { oper Boldface s = "\\textbf{" ++ s ++ "}" ; oper Heading s = "\\section{" ++ s ++ "}" ; } ``` Notice that both ``interface``s and ``instance``s may ``open`` ``resource``s (and also reused top-level grammars). An ``interface`` may moreover define some of the operations it declares; these definitions are inherited by all instances and cannot be changed in them. Inheritance by module extension is possible, as always, between modules of the same type. ===Using an interface=== An ``interface`` or an ``instance`` can be ``open``ed in a ``concrete`` using the same syntax as when opening a ``resource``. For an ``instance``, the semantics is the same as when opening the definitions together with the type signatures - one can think of an ``interface`` and an ``instance`` of it together forming an ordinary ``resource``. Opening an ``interface``, however, is different: functions that are only declared without having a definition cannot be compiled (inlined); neither can functions whose definitions depend on undefined functions. A module that ``open``s an ``interface`` is therefore **incomplete**, and has to be **completed** with an ``instance`` of the interface to become complete. To make this situation clear, GF requires any module that opens an ``interface`` to be marked as ``incomplete``. Thus the module ``` incomplete concrete DocMarkup of Doc = open Markup in { ... } ``` uses the interface ``Markup`` to place markup in chosen places in its linearization rules, but the implementation of markup - whether in HTML or in LaTeX - is left unspecified. This is a powerful way of sharing the code of a whole module with just differences in the definitions of some constants. Another terminology for ``incomplete`` modules is **parametrized modules** or **functors**. The ``interface`` gives the list of parameters that the functor depends on. ===Instantiating an interface=== To complete an ``incomplete`` module, each ``inteface`` that it opens has to be provided an ``instance``. The following syntax is used for this: ``` concrete DocHTML of Doc = DocMarkup with (Markup = MarkupHTML) ; ``` Instantiation of ``Markup`` with ``MarkupLatex`` is another one-liner. If more interfaces than one are instantiated, a comma-separated list of equations in parentheses is used, e.g. ``` concrete MusicIta = MusicI with (Syntax = SyntaxIta), (LexMusic = LexMusicIta) ; ``` This example shows a common design pattern for building applications: the concrete syntax is a functor on the generic resource grammar library interface ``Syntax`` and a domain-specific lexicon interface, here ``LexMusic``. All interfaces that are ``open``ed in the completed model must be completed. Notice that the completion of an ``incomplete`` module may at the same time extend modules of the same type (which need not be completions). It can also add new judgements in a module body, and restrict inheritance from the functor. ``` concrete MusicIta = MusicI - [f] with (Syntax = SyntaxIta), (LexMusic = LexMusicIta) ** { lin f = ... } ; ``` ===Compiling interfaces, instances, and parametrized modules=== Interfaces, instances, and parametric modules are purely a front-end feature of GF: these module types do not exist in the ``gfc`` and ``gfr`` formats. The compiler has nevertheless to keep track of their dependencies and modification times. Here is a summary of how they are compiled: - an ``interface`` is compiled into a ``resource`` with an empty body - an ``instance`` is compiled into a ``resource`` in union with its ``interface`` - an ``incomplete`` module (``concrete`` or ``resource``) is compiled into a module of the same type with an empty body - a completion module (``concrete`` or ``resource``) is compiled into a module of the same type by compiling its functor so that, instead of each ``interface``, its given ``instance`` is used This means that some generated code is duplicated, because those operations that do have complete definitions in an ``interface`` are copied to each of the ``instances``. =Summary of module syntax and semantics= ==Abstract syntax modules== Syntax: ``abstract`` A ``=`` (A#SUB1,...,A#SUBn ``**``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }`` where - i >= 0 - each //A#SUBi// is itself an abstract module, possibly with restrictions on inheritance, i.e. //A#SUBi//``-[``//f,..,g//``]`` or //A#SUBi//``[``//f,..,g//``]`` - each //J#SUBi// is a judgement of one of the forms ``cat, fun, def, data`` Semantic conditions: - all inherited names declared in each //A#SUBi// and //A// must be distinct - names in restriction lists must be defined in the restricted module - inherited constants may not depend on names excluded by restriction ==Concrete syntax modules== Syntax: ``incomplete``? ``concrete`` C ``of`` A ``=`` (C#SUB1,...,C#SUBn ``**``)? (``open`` O#SUB1,...,O#SUBk ``in``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }`` where - i >= 0 - //A// is an abstract module - each //C#SUBi// is a concrete module, possibly with restrictions on inheritance, i.e. //C#SUBi//``-[``//f,..,g//``]`` - each //O#SUBi// is an open specification, of one of the forms - //R// - ``(``//Q//``=``//R//``)`` where //R// is a resource, instance, or concrete, and //Q// is any identifier - each //J#SUBi// is a judgement of one of the forms ``lincat, lin, lindef, printname``; also the forms ``oper, param`` are allowed, but they cannot be inherited. If the modifier ``incomplete`` appears, then any //R// in an open specification may also be an interface or an abstract. Semantic conditions: - each ``cat`` judgement in //A// must have a corresponding, unique ``lincat`` judgement in //C// - each ``fun`` judgement in //A// must have a corresponding, unique ``lin`` judgement in //C// - names in restriction lists must be defined in the restricted module - inherited constants may not depend on names excluded by restriction ==Resource modules== Syntax: ``resource`` R ``=`` (R#SUB1,...,R#SUBn ``**``)? (``open`` O#SUB1,...,O#SUBk ``in``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }`` where - i >= 0 - each //R#SUBi// is a resource, instance, or concrete module, possibly with restrictions on inheritance, i.e. //R#SUBi//``-[``//f,..,g//``]`` - each //O#SUBi// is an open specification, of one of the forms - //P// - ``(``//Q//``=``//R//``)`` where //P// is a resource, instance, or concrete, and //Q// is any identifier - each //J#SUBi// is a judgement of one of the forms ``oper, param`` Semantic conditions: - all names defined in each //R#SUBi// and //R// must be distinct - all constants declared must have a definition - names in restriction lists must be defined in the restricted module - inherited constants may not depend on names excluded by restriction ==Interface modules== Syntax: ``interface`` R ``=`` (R#SUB1,...,R#SUBn ``**``)? (``open`` O#SUB1,...,O#SUBk ``in``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }`` where - i >= 0 - each //R#SUBi// is an interface or abstract module, possibly with restrictions on inheritance, i.e. //R#SUBi//``-[``//f,..,g//``]`` - each //O#SUBi// is an open specification, of one of the forms - //P// - ``(``//Q//``=``//R//``)`` where //P// is a resource, instance, or concrete, and //Q// is any identifier - each //J#SUBi// is a judgement of one of the forms ``oper, param`` Semantic conditions: - all names declared in each //R#SUBi// and //R// must be distinct - names in restriction lists must be defined in the restricted module - inherited constants may not depend on names excluded by restriction ==Instance modules== Syntax: ``instance`` R ``of`` I ``=`` (R#SUB1,...,R#SUBn ``**``)? (``open`` O#SUB1,...,O#SUBk ``in``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }`` where - i >= 0 - //I// is an interface module - each //R#SUBi// is an instance, resource, or concrete module, possibly with restrictions on inheritance, i.e. //R#SUBi//``-[``//f,..,g//``]`` - each //O#SUBi// is an open specification, of one of the forms - //P// - ``(``//Q//``=``//R//``)`` where //P// is a resource, instance, or concrete, and //Q// is any identifier - each //J#SUBi// is a judgement of one of the forms ``oper, param`` Semantic conditions: - all names declared in each //R#SUBi//, //I//, and //R// must be distinct - all constants declared in //I// must have a definition either in //I// or //R// - names in restriction lists must be defined in the restricted module - inherited constants may not depend on names excluded by restriction ==Instantiated concrete syntax modules== Syntax: ``concrete`` C ``of`` A ``=`` (C#SUB1,...,C#SUBn ``**``)? B ``with`` ``(``I#SUB1 ``=``J#SUB1``),`` ... ``, (``I#SUBp ``=``J#SUBp``)`` (``-``? ``[``c#SUB1,...,c#SUBq ``]``)? (``**``? (``open`` O#SUB1,...,O#SUBk ``in``)? ``{``J#SUB1 ``;`` ... ``;`` J#SUBm ``; }``)? ``;`` where - i >= 0 - //A// is an abstract module - each //C#SUBi// is a concrete module, possibly with restrictions on inheritance, i.e. //R#SUBi//``-[``//f,..,g//``]`` - //B// is an incomplete concrete syntax of //A// - each //I#SUBi// is an interface or an abstract - each //J#SUBi// is an instance or a concrete of //I#SUBi// - each //O#SUBi// is an open specification, of one of the forms - //R// - ``(``//Q//``=``//R//``)`` where //R// is a resource, instance, or concrete, and //Q// is any identifier - each //J#SUBi// is a judgement of one of the forms ``lincat, lin, lindef, printname``; also the forms ``oper, param`` are allowed, but they cannot be inherited.